H3C Technologies H3C Intelligent Management Center - Manual (Page 18)

10
• Select 8, 15, 50, 100, 200, or 1000 at the bottom of the list to configure how many items per page
you want to display.
Adding devices
You can add devices from the IMC Platform to QoSM.
Accessing the window for selecting devices
In the Apply Policy to Interface or Apply Policy to VLAN area, click Select Device. The window for
selecting devices appears, from which you can filter devices by view or advanced query.
Filtering devices by view
1. In the Query Conditions area, click the By View tab.
2. Click the Expand icon to the left of the IP View, Device View, or Custom View field, and then
select a subview.
The views are described as follows:
{
IP View—Displays devices by network segment.
{
Device View—Displays devices by device category.
{
Custom View—Displays devices by custom view. The view has a subview named Devices Not In
Views to display devices that do not belong to any custom view.
All devices in the subview are displayed in the Devices Found area.
Filtering devices by advanced query
1. In the Query Conditions area, click the Advanced tab.
2. Specify one or more of the following query criteria:
{
Device IP—Enter an IP address for devices.
If Exact Query is selected, enter a complete IPv4 address. If Exact Query is not selected, enter
a partial or complete IPv4 address.
{
Device IP List—Click the Configuration icon next to the Device IP List field to perform an
exact query for multiple devices.
In the Device IP List Configuration window, enter multiple IP addresses separated by commas,
semicolons, or carriage returns, click Add, and click OK.
{
Device Label—Enter a partial or complete device label.
{
Device Status—Select a device state from the list: Unmanaged, Unknown, Normal, Warning,
Minor, Major, or Critical.
{
Device Category—Select a device type from the list: Routers, Switches, Servers, Security,
Storage, Wireless, Voice, Surveillance, Video, Virtual Devices, Module, Application Controller,
SAN Controller, Printers, UPS, Desktops, or Others.
{
Device Series—Select device series from the list. Options include all device series that are
added to the IMC Platform. You can select one or all device series of a vendor.
{
Contact—Enter partial or complete contact information for devices. This criterion is case
insensitive.
{
Location—Enter partial or complete location information for devices. This criterion is case
insensitive.
{
Device Reachability—Select a reachability state from the list: Reachable or Unreachable.