H3C Technologies H3C Intelligent Management Center - Manual (Page 120)

112
12. Click Next.
The Summary page appears.
13. Click Finish.
Adding MQC deployment task to limit the bandwidth from FTP server to non-R&D departments
1. Click the Service tab.
2. From the navigation tree, select QoS Manager > Deploy Task.
3. Click Add on the toolbar.
The Deploy Guide page appears.
4. In the Apply Policy to Interface area, click Select Device.
5. Select SWD (192.168.1.1) switch from the popup window.
6. Click the Select Device Interface icon in the Number of interfaces (outbound direction) column.
7. Select Ten-GigabitEthernet1/0/51 from the popup window.
8. Click Next.
The Setting QoS Policy page appears.
9. Select LimitFTPtoNon-R&D from the list of Select service.
Figure 44 Setting QoS policy
10. Click Next.
The Basic Information page appears.
11. Configure the following parameters:
{
Task Name—Enter task name LimitTxRateFTPtoNonRD.
{
For the policy deployed—Select Overwrite.
{
Predefined Execution Time—Select Immediately.
{
Task Description—Enter a description for the task.
12. Click Next.