H3C Technologies H3C Intelligent Management Center - Manual (Page 20)

12
Adding VLANs
1. In the Apply Policy to VLAN area, click the Select VLAN icon in the VLAN (Inbound) or VLAN
(Outbound) Column.
The window for selecting VLANs appears.
2. Add VLANs to the Selected VLAN area:
{
To add one or more VLANs, select the VLANs in the Device VLAN area and click the Add icon
.
{
To add all VLANs, click the Add All icon .
3. Remove undesired VLANs from the Selected VLAN area:
{
To remove one or more VLANs, select the VLANs in the Selected VLAN area and click the
Remove icon .
{
To remove all VLANs, click the Remove All icon .
4. Click OK.
NOTE:
• If less than two VLANs are found, the window does not include the Add All icon and the
Remove All icon .
• To select multiple VLANs, press Ctrl when you select the VLANs.