H3C Technologies H3C Intelligent Management Center User Manual
Page 113
Advertising
105
Figure 35 Configure basic information
3.
Click Next.
The Policy Parameter page appears.
4.
Click the
icon next to the Classifier field, select classifier Admin-R&D from the popup window.
5.
Click the
icon next to the Behavior field, select behavior Deny from the popup window.
6.
Click Add.
The configured classifier-behavior association is added to the Classifier and Behavior Matching
List.
7.
Repeat step 4 through step 6 to add HR-R&D—Deny, FA-R&D—Deny, Admin-CptServer—Deny,
HR-CptServer—Deny, and FA-CptServer—Deny associations.
Advertising