H3C Technologies H3C Intelligent Management Center - Manual (Page 11)

3
2 Configuration procedures
QoSM allows you to deploy QoS policies and interface QoS configurations to QoS-capable devices.
Configuration prerequisites
To deploy QoS policies and interface QoS configurations to a device, the following conditions must be
met:
• The device is QoS capable.
• The device has been added to IMC and configured with correct SNMP settings.
• The device has been synchronized in IMC.
Deploying a QoS policy
You can deploy a QoS policy to multiple interfaces on multiple devices. The recommended configuration
procedure is as follows:
1. Creating a classifier.
2. Creating a behavior.
3. Creating a QoS policy.
4. Creating a deployment task from the QoS policy.
Creating a classifier
A classifier classifies packets by using one or more match criteria and specifies the match policy (match
any or all of the match criteria) through the logical relationship among the match criteria.
To create a classifier:
1. Click the Service tab, as shown in Figure 1 .
2. From the navigation tree, select QoS Manager > QoS Resource > Classifier.
3. Click Add.
For more information about creating a classifier, see "
Adding a classifier ."