Alarm process – H3C Technologies H3C Intelligent Management Center User Manual
Page 47
39
for each task of a process instance. Only the specified user accounts or groups can execute the
tasks. Assign privileges in terms of the task’s dealers.
You do not need to assign a dealer to the Close Confirm task, as iCC does this automatically.
NOTE:
•
Modifications to the Admin Users/Groups or Users/Groups settings do not immediately take effect for open
tasks. You need to close the tasks and then open them again for changes to take effect.
•
When you configure the Admin Users/Groups or Users/Groups field, the system does not check whether the
specified users or groups exist. If you delete the specified users or groups and then add them again, the users
or groups will automatically have operation permission for the process.
•
The Admin Users/Groups and Users/Groups fields support left-to-right matching of the input string. For
example, if you input “abc”, the system lists the accounts whose names start with “abc” rather than all account
names that contain “abc”.
4.
Click Save.
5.
Click OK.
Alarm Process
For more information about the Alarm management, see ''H3C IMC Base Platform Administrator
Guide''.
To configure the Alarm process:
1.
Under Process Management in the navigation pane, right-click Alarm Process, and then click
Config Process. The Config Process dialog box appears, as shown in