Magnum Energy ME-ARC Remote - Manual (Page 13)

© 2012 Magnum Energy, Inc. 7
2.0 Installation
2.5 Power-up Self Test
Info: All power to operate the remote control is provided by the
inverter/charger through the remote cable.
When the ME-ARC is first connected to an inverter, a power-up self test is
initialized. During the self test, the LCD automatically displays in sequence:
• “MAGNUM ENERGY Self Test”, then
•
“(C) 2010-2012, Connecting to...”, and then
• “ME-ARC V 3.0, INV/CHG V #.#”
The remote’s LEDs also change with the screens (see Figure 2-7).
FAULT
PWR
CHG
INV
MAGNUM ENERGY
Self Test
FAULT
PWR
CHG
INV
(C)2010-2012
Connecting to..
FAULT
PWR
CHG
INV
ME-ARC V 3.0
INV/CHG V #.#
No LEDs light
PWR lights green
FAULT lights red
CHG lights green
INV lights green
CHG lights green
INV lights green
After the self test is finished the remote displays “Set Clock”.Use the ME-ARC’s
SELECT knob to set the correct time by selecting hour, minutes, and either
AM or PM (See Figure 2-8 below, and the Set Clock procedure on page 22).
Figure 2-7, Power-up Self Test Screens
Set Clock
AM-PM = 12:00 A
Set Clock
Minute = 12: 12 A
Set Clock
Hour = 12 :00A
Figure 2-8, Self Test Set Clock Screens