Magnum Energy ME-ARC Remote - Manual (Page 14)

8 © 2012 Magnum Energy, Inc.
3.0 Setup
3.0 Setup
When the remote is connected to a Magnum inverter/charger, the settings in
the remote control determine the inverter/charger’s operating parameters.
The default settings in the remote control are adequate for most installations
(see Table 3-4); however, you have the option to change some of the
operating parameters. This section shows you how to navigate the remote
and gives you an understanding of the function of each adjustable setting.
3.1 Navigating the Remote
The ME-ARC has menu items and adjustable settings that provide the ability
to confi gure your inverter/charger to your specifi c parameters.
Info: See Figures 4-1 through 4-5 for complete maps of the inverter/
charger’s menu items and adjustable settings.
Familiarize yourself with the display and controls on the remote’s front panel
that are used to fi nd, adjust, and save the desired settings (see Figure 3-1).
• LCD
Display – The 2-line LCD display shows status and information for
the inverter/charger and any attached accessories. All setup menus and
faults also appear on the LCD display.
Info: The LCD display returns to the remote home screen to show
DC voltage and current (see Figure 3-1) after fi ve minutes if no
buttons have been pressed.
Info: When the ← (left facing arrow) symbol is shown on the display,
the displayed setting has been selected and will be used.
• Menu Buttons (x5) – These fi ve buttons allow simple access to menu
items that can help with confi guring, monitoring, and troubleshooting
your inverter/charger system.
• Rotary SELECT Knob – This rotary knob allows you to quickly scroll
through and select various menu items and settings. Pressing the knob
selects the menu item to change, or saves the current selection.
Info: Hold down the SELECT knob for 10 seconds to refresh the LCD
display.
Rotary
SELECT Knob
LCD
Display
Menu
Buttons
Figure 3-1, Front Panel Setup Features