RIGOL DM3058 - Manual (Page 101)

RIGOL
Programming Guide for DM3058/DM3058E 4-8
Note the average value could be read any time.
Return Format:
The query returns the average of all data after calculation.
9. CALCulate:AVERage:COUNt?
Command Format:
CALCulate:AVERage:COUNt?
Function:
The command queries the number of data calculated.
Explanations:
The command is valid only when the calculation function (CALCulate:FUNCtion
AVERage) is enabled under calculation is active (CALCulate:STATe ON).
Note the number of data could be read any time.
Return Format:
The query returns the number of data calculated.
10. CALCulate:AVERage:MAXimum?
Command Format:
CALCulate:AVERage:MAXimum?
Function:
The command queries the maximum statistic value of current measurement.
Explanations:
The command is valid only when the calculation function (CALCulate:FUNCtion
AVERage) is enabled under calculation is active (CALCulate:STATe ON).
Note the maximum data could be read any time.
Return Format:
The query returns the maximum statistic value of current measurement.