RIGOL DM3058 - Manual (Page 128)

RIGOL
Programming Guide for DM3058/DM3058E 4-35
[SENSe:]RESistance:RANGe? [MINimum|MAXimum] – Queries the current range
of 2-wire resistance measurement.
Both 2-wire and 4-wire resistance measurements are influenced by this command.
All the commands of 2-wire and 4-wire resistance will have influence over the
setting of resistance.
Return Format:
The query returns the range of 2-wire resistance measurement.
7. [SENSe:]FRESistance:RANGe
Command Format:
[SENSe:]FRESistance:RANGe {<range>|MINimum|MAXimum}
[SENSe:]FRESistance:RANGe? [MINimum|MAXimum]
Function:
The commands set and query the range of 4-wire resistance measurement.
Parameter:
Name Type Range Default
<range> Discrete {200 Ω|2 kΩ|20 kΩ|200 kΩ
|2 MΩ|10 MΩ|100 MΩ}
200 kΩ
Explanations:
[SENSe:]FRESistance:RANGe {<range>|MINimum|MAXimum} - Sets the desired
range of 4-wire resistance measurement from {200 Ω|2 kΩ|20 kΩ|200 kΩ|2
MΩ|10 MΩ|100 MΩ}; thereinto, MIN = 200 Ω, MAX = 100 MΩ and the unit is Ω. If
a 2 kΩ range is required, enter 2000 as its parameter.
[SENSe:]FRESistance:RANGe? [MINimum|MAXimum] – Queries the current
range of 4-wire resistance measurement.
Both 2-wire and 4-wire resistance measurements are influenced by this command.
All the commands of 2-wire and 4-wire resistance will have influence over the
setting of resistance.
Return Format:
The query returns the range of 4-wire resistance measurement.