RIGOL DM3058 - Manual (Page 95)

RIGOL
Programming Guide for DM3058/DM3058E 4-2
CALCulate Commands
The commands set the calculation operations, which mainly include:
 CALCulate:FUNCtion
 CALCulate:STATe
 CALCulate:LIMit:LOWer
 CALCulate:LIMit:UPPer
 CALCulate:DB:REFerence
 CALCulate:DBM:REFerence
 CALCulate:NULL:OFFSet
 CALCulate:AVERage:AVERage?
 CALCulate:AVERage:COUNt?
 CALCulate:AVERage:MAXimum?
 CALCulate:AVERage:MINimum?