RIGOL DM3058 - Manual (Page 145)

RIGOL
Programming Guide for DM3058/DM3058E 4-52
TRIGger Commands
The commands set the trigger parameters such as trigger times, delay time and
others. Command “SENSe:<function>: RANGe:AUTO OFF” is suggested to be used
for disabling auto range function, and the commands “SENSe:<function>:RANGe,
CONFigure” or “MEASure?” is for seting range manually.
The trigger commands mainly include:
 TRIGger:COUNt
 TRIGger:DELay
 TRIGger:DELay:AUTO
 TRIGger:SOURce