RIGOL DM3058 - Manual (Page 86)

RIGOL
Programming Guide for DM3058/DM3058E 3-61
Explanations:
:TRIGger:VMComplete:POLAr? – Queries the current VMC output polar, the
default is POS (positive).
:TRIGger:VMComplete:POLAr {POS|NEG} – Sets the VMC output polar to be used.
The parameters provided are positive and negative.
Return Format:
The query returns the current VMC output polar, POS or NEG.
9. :TRIGger:VMComplete:PULSewidth
Command Format:
:TRIGger:VMComplete:PULSewidth?
:TRIGger:VMComplete:PULSewidth <value>
Function:
The commands query and set the VMC output pulsewidth.
Parameter:
Name Type Range Default
<value>
Consecutive
Integer
See Explanations
below
100
Explanations:
:TRIGger:VMComplete:PULSewidth? – Queries the current VMC output
pulsewidth, the default is 100ms.
:TRIGger:VMComplete:PULSewidth <value> - Sets the desired VMC output
pulsewidth, the unit is ms.
Note the ranging of pulsewidth will vary with sample rate. When the smaple rate
is S, the range is 1~399(ms); when the sample rate is M, the range is 1~49(ms);
and when the sample rate is F, the range is 1~7(ms).
Return Format:
The query returns the VMC output pulsewidth time.