RIGOL DM3058 - Manual (Page 88)

RIGOL
Programming Guide for DM3058/DM3058E 3-63
1. :UTILity:INTErface:LAN:DHCP
Command Format:
:UTILity:INTErface:LAN:DHCP?
:UTILity:INTErface:LAN:DHCP {ON|OFF|1|0}
Function:
The commands query and set the DHCP state.
Explanations:
:UTILity:INTErface:LAN:DHCP? – Queries if the DHCP is opened.
:UTILity:INTErface:LAN:DHCP {ON|OFF|1|0} – Sets the DHCP state to be used.
Return Format:
The query returns ON (1) or OFF (0).
2. :UTILity:INTErface:LAN:AUTOip
Command Format:
:UTILity:INTErface:LAN:AUTOip?
:UTILity:INTErface:LAN:AUTOip {ON|OFF|1|0}
Function:
The commands query and set the state of Auto IP.
Explanations:
:UTILity:INTErface:LAN:AUTOip? – Queries if Auto IP is enabled.
:UTILity:INTErface:LAN:AUTOip {ON|OFF|1|0} – Sets the state of Auto IP to be
used.
Return Format:
The query returns ON (1) or OFF (0).
3. :UTILity:INTErface:LAN:MANUip
Command Format: