RIGOL DM3058 - Manual (Page 72)

RIGOL
Programming Guide for DM3058/DM3058E 3-47
:RATE:VOLTage:AC? - Queries the current measuring rate of AC voltage. The
command is valid only when ACV function is enabled.
:RATE:VOLTage:AC {F|M|S} - Sets the desired measuring rate of AC voltage. For
the range and the explanation of each parameter, see Table 3-10.
Return Format:
The query returns the parameter related to current rate (see Table 3-10).
Example:
Sets the rate under AC voltage measurement to Medium.
:RATE:VOLTage:AC M
3. :RATE:CURRent:DC
Command Format:
:RATE:CURRent:DC?
:RATE:CURRent:DC {F|M|S}
Function:
The commands query and set the rate of DC current measurement.
Explanations:
:RATE:CURRent:DC? - Queries the current measuring rate of DC current. The
command is valid only when DC current function is enabled.
:RATE:CURRent:DC {F|M|S} Sets the desired measuring rate of DC current. For
the range and the explanation of each parameter, see Table 3-10.
Return Format:
The query returns the parameter related to current rate (see Table 3-10).
Example:
Sets the rate under DC current measurement to Medium.
:RATE:CURRent:DC M