RIGOL DM3058 - Manual (Page 105)

RIGOL
Programming Guide for DM3058/DM3058E 4-12
The command presets the multimeter as specified range and resolution for AC
voltage measurement, but does not start the measurement.
Parameter:
Name Type Range Default
<range> Discrete {200 mV|2 V|20 V
|200 V|750 V|AUTO}
AUTO
<resolution> Discrete Refer to Table 4-2 1ppm x range
Explanations:
The unit is V.
For <range>: MIN = 0. 2 (200 mV), MAX = 750; DEF=AUTO.
<resolution> relates to both the measurement rate and integration time, see
Table 4-2.
3. CONFigure:CURRent:DC
Command Format:
CONFigure:CURRent:DC
{<range>|MIN|MAX|DEF},{<resolution>|MIN|MAX|DEF}
Function:
The command presets the multimeter as specified range and resolution for DC
current measurement, but does not start the measurement.
Parameter:
Name Type Range Default
<range> Discrete {200 µA|2 mA|20 mA
|200 mA|2 A|10 A |AUTO}
AUTO
<resolution> Discrete Refer to Table 4-2 1ppm x range
Explanations:
The unit is A.
For <range>: MIN = 0. 0002 (200Μa); MAX = 10, DEF=AUTO.
<resolution> relates to both the measurement rate and integration time, see
Table 4-2.