RIGOL DM3058 - Manual (Page 87)

RIGOL
Programming Guide for DM3058/DM3058E 3-62
:UTILity Commands
The commands set the communication parameters. Please make sure that
communication interface has been connected stably to avoid errors or abnormal
phenomena.
The commands mainly include:
 :UTILity:INTErface:LAN:DHCP*
 :UTILity:INTErface:LAN:AUTOip*
 :UTILity:INTErface:LAN:MANUip*
 :UTILity:INTErface:LAN:IP*
 :UTILity:INTErface:LAN:MASK*
 :UTILity:INTErface:LAN:GATEway*
 :UTILity:INTErface:LAN:DNS*
 :UTILity:INTErface:GPIB:ADDRess*
 :UTILity:INTErface:RS232:BAUD
 :UTILity:INTErface:RS232:PARIty
Note*: The GPIB and LAN interfaces are only supported by DM3058.