RIGOL DM3058 - Manual (Page 96)

RIGOL
Programming Guide for DM3058/DM3058E 4-3
1. CALCulate:FUNCtion
Command Format:
CALCulate:FUNCtion {NULL|DB|DBM|AVERage|LIMit}
CALCulate:FUNCtion?
Function:
The commands set and query the calculation function.
Explanations:
The subsystem must be enabled through CALCulate:STATe {OFF|ON} before
using this comamnd.
CALCulate:FUNCtion {NULL|DB|DBM|AVERage|LIMit} – Selects the calculation
function to be used, the default is NULL.
CALCulate:FUNCtion? – Queries the current calculation function.
Table 4-1 Function abbreviation and explanation
Items Explanation
NULL Null operation (REL)
DB dB operation
DBM dBm operation
AVERAGE Average operation
LIMIT Limit operation (PF
operation)
Note: The operation NULL and LIMIT in Agilent commands system is equal to
REL and PF operation in DM3058/DM3058E, separately.
Return Format:
The query returns NULL, DB, DBM, AVER or LIM.
2. CALCulate:STATe
Command Format:
CALCulate:STATe {OFF|ON}
CALCulate:STATe?
Function:
The commands set and query the calculation state.