RIGOL DM3058 - Manual (Page 17)

RIGOL
Programming Guide for DM3058/DM3058E 2-8
STATus Commands
The commands set and query both the Questionable Status Register and Operation
Status Register, which mainly include:
 STATus:OPERation:CONDition?
 STATus:OPERation:ENABle
 STATus:OPERation[:EVENt]?
 STATus:PRESet
 STATus:QUEStionable:CONDition?
 STATus:QUEStionable:ENABle
 STATus:QUEStionable[:EVENt]?
The principle of Status Register is shown in Figure 2-1, which contains Questionable
Status Register, Operation Status Register, Event Status Register and Status Byte
Register as well as Output Buffer and Error Queue. The status commands set or query
the Questionable Status Register and Operation Status Register in Status Register.
About the detailed operations to the Event Status Register and Status Byte Register as
well as Output Queue and Error Queue on the basis of IEEE488 commands, please
refer to the above section.