RIGOL DM3058 - Manual (Page 160)

RIGOL
Programming Guide for DM3058/DM3058E 5-11
8. MAXSET
Command Format:
MAXSET <numeric value>
Function:
The command enables the multimeter enter MAX operation with <numeric
value> as maximum.
Explanations:
<numeric value> could be a signed integer, a signed real number without
exponent, or a signed real number with exponent, and the new value must be
greater than last one. IF <numeric value> is overrange, an Execution Error may
generate. The auto range function is disabled in this mode.
9. MIN
Command Format:
MIN
Function:
The command enables the multimeter enter MIN operation with current reading
as minimum.
Explanations:
If the multimeter has been in MIN mode, the minimum value will be shown on the
screen. Note the auto range function is disabled in this mode.
10. MINSET
Command Format:
MINSET <numeric value>
Function:
The command enables the multimeter enter MIN operation with <numeric value>
as minimum.