RIGOL DM3058 - Manual (Page 75)

RIGOL
Programming Guide for DM3058/DM3058E 3-50
The commands query and set the rate of sensor measurement.
Explanations:
:RATE:SENSor? - Queries the current measuring rate of sensor. The command is
valid only when sensor function is enabled.
:RATE:SENSor {M|S} - Sets the desired measuring rate of sensor. For the range
and the explanation of each parameter, see Table 3-10.
Return Format:
The query returns the parameter related to current sensor rate (see Table 3-10).
Example:
Sets the rate under sensor measurement to Medium.
:RATE:SENSor M