RIGOL DM3058 - Manual (Page 154)

RIGOL
Programming Guide for DM3058/DM3058E 5-5
The command queries the identifiers of selected function on the main or vice
display.
Explanations:
FUNC1? - Queries the current measurement funtion of main display.
FUNC2? - Queries the current measurement funtion of vice display.
If the vice display is disabled, an error may be generated when using FUNC2?.
Return Format:
The query returns the identifiers of current measurement.
FUNC1? - The query may return: AAC, ADC, CONT, DIODE, FREQ, OHMS, VAC,
VDC.
FUNC2? - The query may return: AAC, ADC, FREQ, OHMS, VAC, VDC.
8. OHMS
Command Format:
OHMS
OHMS2
Function:
The command enables the resistance measurement of both main and vice
display.
Explanations:
OHMS - Enables the resistance measurement function of main display.
OHMS2 - Enables the resistance measurement function of vice display.
9. VAC
Command Format:
VAC
VAC2
Function:
The command enables the AC voltage measurement of both main and vice
display.