RIGOL DM3058 - Manual (Page 120)

RIGOL
Programming Guide for DM3058/DM3058E 4-27
measurement, and then sends the readings to the output buffer. For the
parameter range and other related information, refer to CONFigure:PERiod.
Return Format:
The query returns the data stored in output buffer.
9. MEASure:CONTinuity?
Command Format:
MEASure:CONTinuity?
Function:
The command presets and executes the continuity test and then sends the
readings to the output buffer.
Explanations:
Enable the continuity mesurement. The range is 2 kΩ.
Return Format:
The query returns the data stored in output buffer.
10. MEASure:DIODe?
Command Format:
MEASure:DIODe?
Function:
The command presets and execute the diode measurement and then sends the
readings to the output buffer.
Return Format:
The query returns the data stored in output buffer.