RIGOL DM3058 - Manual (Page 133)

RIGOL
Programming Guide for DM3058/DM3058E 4-40
Return Format:
The query returns the auto range state of 2-wire resistance measurement.
15. [SENSe:]FRESistance:RANGe:AUTO
Command Format:
[SENSe:]FRESistance:RANGe:AUTO {ON|OFF}
[SENSe:]FRESistance:RANGe:AUTO?
Function:
The commands set and query the auto range state of 4-wire resistance
measurement.
Explanations:
[SENSe:]FRESistance:RANGe:AUTO {ON|OFF} - Sets the desired auto range
state of 4-wire resistance measurement. If choose ON, the instrument will select
a measurement range according to the signal inputted.
[SENSe:]FRESistance:RANGe:AUTO? – Queries the current auto range state of
4-wire resistance measurement.
Both 2-wire and 4-wire resistance measurements are influenced by this command.
All the commands of 2-wire and 4-wire resistance will have influence over the
setting of resistance.
Return Format:
The query returns the auto range state of 4-wire resistance measurement.
16. [SENSe:]FREQuency:VOLTage:RANGe:AUTO
Command Format:
[SENSe:]FREQuency:VOLTage:RANGe:AUTO {ON|OFF}
[SENSe:]FREQuency:VOLTage:RANGe:AUTO?
Function:
The commands set and query the auto range state of voltage for frequency
measurement.
Explanations: