Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) - Manual (Page 106)

IQOYA SERV/LINK user manual
106
Click on the chevron to access to these advanced parameters:
Transport protocol Read/Write The protocol to be used to transport SIP signaling. It can be UDP or TCP.
The choice depends on your SIP infrastructure. IQOYA CONNECT,
Digigram’s SIP infrastructure, supports both but UDP is preferable.
Listening network interface Read/Write The network interface to be used by the IP codec instance to listen to the
SIP signaling. Use “Any” if you do not have instructions from your IT
team on this.
Listening port Read/Write Port to be used by the IP codec instance to listen to the SIP signaling.
The web interface proposes you a free port. Keep the proposed value to
avoid port conflicts.
Auto registration Read/Write 'Yes' enables automatic and periodic SIP registration(s) of the IP codec
instance with the SIP server(s). The refresh period of the SIP registration
is defined below.
'No' disables the automatic and periodic SIP registration(s) of the IP
codec instance with the SIP server(s).
Note that manual registration is possible in the call window.
Registration every
(secondes) Read/Write This is the refresh period of the SIP registration in seconds. It is not
recommended to enter a value below 30s. The default value is 120.
Outbound proxy activation Read/Write Enable/disable the use of an outbound SIP proxy.
Outbound proxy domain Read/Write Visible only if “Outbound proxy activation” is yes.
This is the IP address or the domain name of the outbound SIP proxy.
Outbound proxy port Read/Write Visible only if “Outbound proxy activation” is yes.
This is the listening port of the outbound SIP proxy.
Allows symmetric RTP
connections without SIP Read/Write Enables/disables the possibility of also establishing or accepting
symmetric RTP connections.
Presence
Presence activation Read/Write Enable/disable the SIP presence service. Do not disable the SIP
presence service if you use Digigram’s SIP infrastructure IQOYA
CONNECT.
Notification lease (seconds) Read/Write This is the refresh period of the subscription to the presence service. The
lease value must be greater than the field 'Registration every (seconds)’.
The default value is 3600.
Net topology-related setings
Connection to public
internet Read/Write Select the proposition that best matches with your internet connection
topology. Ask you IT team if you don’t know.
If you are using IQOYA CONNECT, Digigram’s SIP infrastructure, choose
“Direct” because IQOYA CONNECT integrates a NAT traversal solution.