Iqoya serv/link user manual 71 – Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) User Manual
Page 71
IQOYA SERV/LINK user manual
71
Parameter
Type
Description
Program
: Basic settings
Program 1(reference)
Read/Write
Select the Program to be streamed from the list of Programs. Program can be in MPEG Layer 2, MPEG
Layer 3, and AAC-ADTS formats.
For multi bitrate HLS, up to 5 additional audio Programs can be selected. They all must be the same audio
compression format (but of course with different bitrates). Click on the icon
to add a Program.
Program
: Advanced settings
Delay on Program x
Read/Write
Delay (expressed in audio samples) to be applied to the Program number X.
This can be used to adjust the synchronization between Programs..
Audio stream: Basic settings
CDN Preset
Read/Write
Select the preset that corresponds to the CDN you want to use; this will only display the parameters
required by this CDN. Presets are:
- AWS: for Amazon Web Services (with AWS authentication)
- Akamaï: for Akamaï CDN (without authentication)
Select “None” to access other CDN’s.
Server URL
Read/Write
Address of the origin server to connect to.
Server mount point
Read/Write
Mount point on the origin server the HLS stream has to be pushed to.
Login
Read/Write
For authentication to the origin server.
Password
Read/Write
For authentication to the origin server.
Protocol
Transport protocol used to push HLS data to the origin server. Select HTTP or HTTPS.
Network port
Network port used to push HLS data to the origin server.