Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) - Manual (Page 13)

IQOYA SERV/LINK user manual
● Possibility to disable/enable any defined priority
● Possibility to stop streaming upon input silence detection with adjustable silence threshold and duration
(for raw RTP streams).
● Decoding of a stereo source to a mono output, with possibility to mix left and right channels
● Dual port redundant streaming with time diversity up to 1 second
● Selectable FECs for ACIP RTP streams (from +15% to +100% IP bandwidth)
● Pro MPEG Cop#3 FEC for MPEG-TS streams (line, columns)
● Automatic audio format detection on the decoder for ACIP streams.
● Real-time metrics on network path quality (jitter, lost packets, duplicated packets, disordered packets) for
the primary stream as well as for the FEC stream.
● Adjustable jitter buffer
● Management of lost packets, disordered packets, duplicated packets, and AAC error concealment
● RS232 tunneling
● GPIO tunneling
● WEB user rights management
● NTP synchronization (date and time)
● Save / load full codec configuration
● Save / load audio configuration
● Remote firmware update
● Audio still active during firmware upload
● Firmware version N and N-1 locally stored
● SNMPv2c and v3 (SET, GET, Traps)
Features specific to the contribution mode
● Support of DHCP
● Support for SIP signaling protocol including SIP presence information
● Support for symmetric RTP
● Asymmetric algorithmic encoding/decoding
● Contact list management
● Call profile management
● Possibility to place calls choosing the correspondent in an address book and the call profile in a call profile
list and to accept or deny incoming calls.
2.2 Optional software features
● aptX TM audio format
● Optional audio synchronization on NTP clock
● Number of audio I/Os supported for MADI, AES67, and Dante base versions
● Number of audio buses for IP streams transcoding
● 1+1 redundancy
13