Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) - Manual (Page 85)

IQOYA SERV/LINK user manual
85
Parameters are the same as above, except the audio input that must be selected instead of a sound file or
playlist.
Once output programs have been defined, they are listed in the “Programs” page.
To view the content of a program, click on on the left of its name.
The decoding priorities of the program are displayed as well as some associated information:
● Name: program name
● Priority: 1, 2, or 3 priorities are displayed, depending on what has been defined.
● Source: displays the name of the audio source defined for the priority
● Program status: Displays the status of the program, and the status of each priority.
Possible program statuses are:
- Green LED => the first enabled priority is decoded.
- Orange LED => the source of a priority is missing
- Red LED => all the defined sources are missing.
Possible priority statuses are:
- Playing: IQOYA is playing this priority
- Missing : the audio source of the priority is missing
- Disable: the decoding priority is disabled
- Available: means that the source of this priority is detected, but a higher priority source is being played.
● Audio format: display the audio format of the decoded IP service.
● First output: displays the first output used for the program
● Serial: displays the serial port that outputs tunneled serial data.
● GPOs: displays the GPO that reflect the tunneled statuses