Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) - Manual (Page 159)

IQOYA SERV/LINK user manual
- 47, 58, 87, 116, 160 and 174 kbps for HE-AAC, HE-AAC_ADTS and HE-AAC_ADTS_CRC
- 47 kbps HE-AACv2, HE-AAC_ADTSv2 and HE-AAC_ADTS_CRCv2
16.12 Firmware v02.13a003- March 2018
16.12.1 What’s new since 2.10f003
● Virtual GPIOs.
● Send program can be used in several send IP service.
● Send silence detection are now managed with the send program. Each program can have its own
settings.
● Receive silence detection are available on each receive program priority. Each priority can have its own
settings.
● Backup switching settings are now available for each receive program. Each program can have its own
settings.
● Direct access to the log page through the status LED.
● Multiple check-box selection with control and shift key on all list pages.
● AAC with CRC audio formats.
● PCR interval settings in Separate mode for MPEG-TS stream [40 - 100ms].
● WEB User login customization.
● Allow 44100Hz and 22050Hz encoding for HTTP Send IP Services when the audio core is running at
48000Hz. These SRC ratios are only available in HTTP streaming (not available for RTP streams and
audio files).
16.13 Firmware v02.10f003- January 2018
16.13.1 What’s new since 2.07c002
● Support of the following bitrates for ACC-LC_ADTS stereot 48 kHz:
- 47kb/s, 58kb/s, 87kb/s, 116kb/s, 174kb/s, 233kb/s, 261kb/s, 290kb/s
16.14 Firmware v02.10e001- August 2017
16.14.1 Fixes 2.10d002
● WEB error "Invalid choice" when the last audio output is selected on Receive - Program
159