2 preferences −> services −> ftp, 3 preferences −> services −> ssh, 4 preferences −> services −> snmp – Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) User Manual
Page 39
IQOYA SERV/LINK user manual
39
For activation of the NTP based audio synchronization, select “Yes” for parameter “
Sync audio on NTP cloc
k”.
This requires that the software option is installed on the IQOYA SERV/LINK, as well as on the associated IQOYA
decoder
s.
8.1.2.2 Preferences −> Services −> FTP
FTP is useful typically for managing the backup playlists and sound files on IQOYA’s internal storage
(uploading/deleting).
FTP service is disabled by default.
Playlist and sound files have to be stored in folder
DEVICE_STORAGE.
8.1.2.3 Preferences −> Services −> SSH
This page allows enabling/disabling the SSH service on IQOYA.
SSH is mainly to be used for advanced diagnostics.
8.1.2.4 Preferences −> Services −> SNMP
This page allows setting the SNMP parameters.
Click on the “Service activation” field.
Select “Yes” to enable the FTP
service, “No” to disable it.
If necessary, you may change the
port used for FTP (default value is
21).
Parameter “Bandwidth limitation”
allows limiting the network
bandwidth of the FTP traffic.
Click on “Apply” to confirm the
changes.
Note that a username and password
are required to establish an FTP
connection to IQOYA SERV/LINK.
Username is: ftp. Password is the
administrator password, by default:
iqoya.