Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) User Manual
Page 114
IQOYA SERV/LINK user manual
114
DSCP
Read/Write
Defines the Quality of Service (QoS) class for the audio stream as
defined in the Differentiated Services Code Point (DSCP) standard.
Possible values are:
●
Default
●
Class 1
●
Class 2
●
Class 3
●
Class 4
●
Class 5
●
Class 6
●
Class 7
●
Assured Forwarding 11 (AF 11)
●
Assured Forwarding 12 (AF 12)
●
Assured Forwarding 13 (AF 13)
●
Assured Forwarding 21 (AF 21)
●
Assured Forwarding 22 (AF 22)
●
Assured Forwarding 23 (AF 23)
●
Assured Forwarding 31 (AF 31)
●
Assured Forwarding 32 (AF 32)
●
Assured Forwarding 33 (AF 33)
●
Assured Forwarding 41 (AF 41)
●
Assured Forwarding 42 (AF 42)
●
Assured Forwarding 43 (AF 43)
●
Expedited Forwarding (EF)
Advise jitter buffer size to callee
Read/Write
This parameter can be checked to recommend a size for the receiving
jitter buffer of the remote party’s device.
Jitter buffer size to advise (ms)
Read/Write
Visible only if “Advise jitter buffer size to callee” is checked.
This parameter is the recommended size for the receiving jitter buffer
of the remote party’s device. The size is in milliseconds.
Receive stream settings section
Asymmetric settings
Read/Write
This parameters allows to negotiate different settings for the audio
stream sent by the remote party than for the audio stream sent to the
remote party.
- Checked: The settings for the audio streams sent by the remote party
and to the remote party are different.
- Unchecked: The settings for the audio streams sent by the remote
party and to the remote party are the same.
Audio encoding format
Read/Write
Visible only if “Asymmetric settings” is checked.
Audio encoding format of the stream sent by the remote party.
Forward error correction
Read/Write
Visible only if “Asymmetric settings” is checked.
Forward Error Correction (FEC) is a technique used to reduce data
transmission errors on unreliable networks by sending additional
information allowing to correct them.
This parameter allows to select the FEC scheme for the FEC stream
sent by the remote party. Possible values are:
●
No FEC stream