Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) - Manual (Page 89)

IQOYA SERV/LINK user manual
9 WEB pages organization in “Remote Broadcasting” mode of use
89
The WEB pages are organized in categories which are always accessible from the left side of the WEB pages.
All the web pages have the same header showing the following information:
- On the left, the status of the fans, the status of the temperatures and the status of the redundant power
supply unit:
The led is green when the status is ok,
The led blinks red when the status is not good.
Note that the redundant power supplies are hot swappable.
- On the right, the device model and the current mode of use:
Icon Category Description
Operations
(Home page)
Displays the mosaic of call pages of the different active codec
instances.
Connections Connection parameters of the unit and of the codec instances:
- at network level - ethernet and IP
- at audio and SIP level
- at user level - contacts and call profiles.
Advanced
Settings System parameters (System properties, clock settings, audio advanced
settings, alarm settings, logs, configuration up- and download, firmware
and license update, password change, shutdown/restart, mode of use
switch).
Secondary network service settings (NTP, FTP, SSH).
Auxiliary data settings (from/to serial ports, GPIO or UDP sockets).
Audio I/Os Audio input and audio output settings: name, type selection, audio level
adjustment, vu-meters
Help About IQOYA SERV/LINK and this user manual.