Iqoya serv/link user manual 65 – Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) User Manual
Page 65
IQOYA SERV/LINK user manual
65
Encapsulation = None and Transport protocol = RTP
Parameter
Type
Description
Program
Name
Read/Write
Select the Program to be streamed from the list of Programs. A Program can be used by several
IP services.
Data tunneling
(This section is displayed only if tunneling has been activated from Preferences->Auxiliary data->GPIO)
Auxiliary data
Read/Write
If there is a serial port hardware option installed, select the serial port that provides the serial
data to be tunnelled in-band.
GPIs
Read/Write
If there is a GPIO hardware option installed, enter a list of GPI numbers whose status is to be
tunnelled in-band. Numbers start from 1 and must be separated by commas
Audio stream
IP address or Domain name
Read/Write
Destination IP address (unicast or multicast) or domain name.
Port
Read/Write
Enter the destination UDP port.