Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) - Manual (Page 54)

IQOYA SERV/LINK user manual
54
If the SERV/LINK features analog inputs, it is possible to adjust both the analog input gain and the digital input
gain.
Selection of analog or digital gain is done thanks to the selector below the fader.
8.2.1.2 Audio I/O −> Input −> settings
This page allows the following:
● select the input signals to be allocated to the encoder inputs
● naming of the encoder inputs
When Digital is selected, a digital gain/attenuation is
applied to the input signal.
When Analog is selected (only possible on
SERV/LINK versions with analog inputs) an analog
gain/attenuation is applied to the input signal. The
value displayed below the fader corresponds to the
input signal level which gives 0 dBfs after analog to
digital conversion