Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) - Manual (Page 33)

IQOYA SERV/LINK user manual
33
Available alarms
Click on a parameter field to be able to
change the values.
Click on “Apply” to confirm your changes.
System log cleared Log file has been
cleared
Eth0 cable unplugged No connection of Eth0
Eth1 cable unplugged No connection of Eth1
Clock sync failed External synchro failure
(PTP, NTP)
Audio clock failed Audio sampling clock
failure
Redundant power
supply failed PSU failure
Temperature failed Temperature too high
Fan failed Internal fan failure
Serial input silent
Send serial overflow
Receive serial overflow
Analog audio input
silent Silence detected on the
analog input according
Receive failed No available defined IP
stream on the output
program
Receive main source failed Priority 1 of the output
program is not available
Receive backup source failed Priority 2 of the output
program is not available
Receive secondary backup
source failed Priority 3 of the output
program is not available
Receive sync failed
Receive main source disabled Priority 1 on the output
program is disabled
Receive backup source disabled Priority 2 on the output
program is disabled
Receive secondary backup
source disabled Priority 3 on the output
program is disabled
Receive main source primary
stream failed In case of streaming with
FEC on priority 1, this
means that the primary
stream is lost on priority 1