Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) User Manual
Page 41
IQOYA SERV/LINK user manual
41
User 1 allows to set the parameters for a user account that has the readonly right.
User 2 allows to set the parameters for a user account that has the read and write rights.
TRAP user allows to set the parameters for a user account that is authorized for receiving traps for the
SERV/LINK.
SNMPv3 Parameter
Type
Description
Engine ID
Read
ID delivered by the IQOYA SNMPv3 agent. May be necessary for a supervisor to
receive the SNMP traps issued by the IQOY.
Access Type
Read Only
Read Only: A user of this category can access the SNMP variables only in read mode
Read / Write: A user of this category can access the SNMP variables in read or write
mode.
Name
Read / Write
Name of the user
Authentication encryption
Read / Write
Specifies the authentication protocol (HMAC-MD5 or HMAC-SHA algorithms) for this
SNMPv3 user.
Authentication pass-phrase
Read / Write
Lets you assign an authentication passphrase for this SNMPv3 user; 8 to 64
characters; no spaces or double quotes allowed.
Frame encryption
Read / Write
Specifies the privacy protocol (DES or AES-128) for this SNMPv3 user.