2 place a call – Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) User Manual
Page 92
IQOYA SERV/LINK user manual
92
Call window (collapsed version):
9.1.2 Place a call
Please refer to the image of the previous paragraph for references to the graphical interface.
To place a call the user (1) select a remote party in the contact list/call history or enter the remote party address,
(2) select a call profile and (3) press the CALL button. The CALL button is grayed out until the remote party and
the profiles have been specified.
Format of the remote party address
● For a SIP connection, the address is:
sip:sip_account_name@sip_server_domain:sip_server_port
(the
sip_server_port
is optional, 5060 is used as default).
The “
sip:
” prefix must not be forgotten when the SIP address is entered manually.
● For a direct SIP connection, the address is:
sip:@remote_party_IP_address:remote_party_SIP_listening_port
(the
remote_party_SIP_listening_port
is optional, 5060 is used as default)
● For a symmetric RTP connection, the address is:
remote_party_IP_address:remote_party_audio_listening_port