Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) - Manual (Page 26)

IQOYA SERV/LINK user manual
● for a network connection through Eth1 port, enter https://192.168.1.100 (this is the default IP address of
Eth1).
The WEB browser displays a message about security certificate. Select the option that allows to continue with
this WEB server.
Enter the requested username and password. The default administrator login is:
username = iqoya
password = iqoya
IQOYA SERV/LINK supports three categories of users: Administrator, User, Read only
● “Administrator” category
A user from the “Administrator” category has all the access rights on the WEB pages.
The login to the embedded WEB server as “Administrator” is:
- username: iqoya
- default password: iqoya
Username and password can only be modified when logged as Administrator. See Preferences −>
System −> Password.
● “User” category
A user from the “User” category has limited access rights. “Write” access is limited to the audio
parameters (audio format, source/target IP address and UDP port).
The login to the embedded WEB server as “User” is:
- username: user
- default password: user
Username and password can only be modified when logged as Administrator. See Preferences −>
System −> Password.
● “Read-only” category
A user from the Read-only category only has “Read” access rights. He cannot modify a single parameter
of the codec.
The login to the embedded WEB server as “Read-only” is:
- username: guest
- default password: guest
Username and password can only be modified when logged as Administrator. See Preferences −>
System −> Password.
26