Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) - Manual (Page 34)

IQOYA SERV/LINK user manual
34
8.1.1.5 Preferences −> System −> Logs
This page allows viewing and downloading the log file of IQOYA SERV/LINK. This log file gives information
about the internal behaviour of IQOYA, and is useful for advanced diagnostics. Traces of enabled alarms are
written into this log file (alarm ON, alarm OFF). This log file is stored internally and is persistent to a power cycle,
a restart or reboot.
Event Type : allows selecting the category of traces to be displayed: Infos, Warnings, Errors, Errors & Warnings.
Codec : allows selecting one of the coedcs so that only log traces related to this codec are displayed. The
number of the codec can be seen from the Send/IP Services page, and from the Receive/ Programs page.
Auto refresh: Yes/No. When set to Yes, the log file display is refreshed every few seconds
Date & Time: clicking on this icon allows to sort out the traces by date and time, starting by most recent traces or
starting by oldest traces.
Reset logs : resets all the traces.
Download logs: allows for remotely downloading the traces log file.
the criteria of silence
Digital audio input silent Silence detected on the
analog input according
the criteria of silence
Receive backup source primary
stream failed In case of streaming with
FEC on priority 2, this
means that the primary
stream is lost on priority 2
Receive secondary backup
source primary stream failed In case of streaming with
FEC on priority 3, this
means that the primary
stream is lost.
Receive main source
redundancy stream failed In case of streaming with
FEC on priority 1, this
means that the FEC is lost.
Receive backup source
redundancy stream failed In case of streaming with
FEC on priority 2, this
means that the FEC is lost.