9 creation of ip streams published to the network – Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) User Manual

Page 135

Advertising
background image

IQOYA SERV/LINK user manual

Click on

on the top of the wEB page to display the main WEB page.

11.9 Creation of IP streams published to the network

 

To declare an RAVENNA/AES67 stream to be published to the network, click on “Create source” from the “Sources” section.

135

The inputs can then be selected on the right part of the window.

Inputs can be selected from the four input ports:


DAW

: This section allows for the selection of the audio inputs that

come from the playback devices.

RAVENNA AUDIO-RA0

: This section allows for the selection of

the audio inputs that come from AoIP streams on Eth0.

RAVENNA AUDIO-RA1

: This section allows for the selection of

the audio inputs that come from AoIP streams on Eth1.

MADI

(optional): This section allows for the selection of the audio

inputs that come from the MADI input.


Note that for a given group, all the inputs come from the same
input port.

Mute

: Allows muting all the channels of the group.

Stream settings

Name

: Enter a name to identify the stream to be generated on the

network (e.g. From My Automation). A default name is
automatically entered, and is taken from the RAVENNA node
Name (in the headline).

Payload

: This is an internal RTP value which informs subscribers

about the nature of the content. Possible values are:

● AES67 Standard Stereo Stream: AES67stereo stream

● RAVENNA 64-Channel stream: RAVENNA stream with 64

channels.

● RAVENNA 8-Channel stream: RAVENNA stream with 8

channels.

● RAVENNA AES/EBU Stereo Stream: AM824 format = 24-bit

audio + 8-bit meta data as used with AES/EBU

● RAVENNA Stereo Stream: 24-bit samples

● Custom: allows defining an other format configuration

(payload, number of channels, frame size, DSCP, and Payload
ID)

Note for DSCP: Select a QoS (Quality of Service) value from
the drop-down menu - EF

(46), AF41 (34), AF31 (26) or Standard (0); the default value is
EF (46). This should match the priority settings used in your
network for preferred real-time media packet forwarding.

Address

: auto. This automatically assigns a multicast IP address

to the generated stream.

Advertising