Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) User Manual
Page 77
![background image](/files/872155/content/doc077.png)
IQOYA SERV/LINK user manual
77
To delete all the IP services, click on the icon
on the left of “Name”, and select
.
To declare a new IP service, click on the button
.
An IP service can also be created by duplicating an existing one. Click on the icon
on the left on the IP
service to be duplicated.
When declaring or editing an IP service the following page is displayed.
In case HTTP is selected for the transport protocol, the following parameters are displayed.
Parameter
Type
Description
IP service name
Read/Write
Name given to this IP service. This is the name that can be selected in the source of a decoding priority of an
output program.
Transport protocol
Read/Write
Values: RTP, UDP, Icecast/Shoutcast
Encapsulation
Read/Write
Only displayed if the selected transport protocol is different from Icecast/Shoutcast.
Values are: None, MPEG-TS SPTS or MPEG-TS MPTS.
Audio stream
IP address
(for RTP and UDP)
Read/Write
In unicast, set this parameter to 127.0.0.1, otherwise enter the multicast IP address to listen to.