Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) - Manual (Page 57)

IQOYA SERV/LINK user manual
57
Select “Unlock faders” to change the output gains.
If the SERV/LINK features analog outputs, it is possible to adjust both the analog output gain and the digital
output gain.
Selection of analog or digital gain is done thanks to the selector below the fader.
8.2.2.2 Audio I/O −> Output −> settings
This page allows the following:
● assign a physical output to a decoder output signal
● naming of the encoder outputs
When Digital is selected, a digital gain/attenuation is
applied to the output signal.
When Analog is selected (only possible on
SERV/LINK versions with analog outputs) an analog
gain/attenuation is applied to the output signal. The
value displayed below the fader corresponds to the
level of the output signal for a 0 dBfs digital signal.