Enterasys Networks Network Card - Manual (Page 101)

RiverMaster Administrator’s Guide
89
Chapter 4 Adding an Authorization Plug-In
Setting Up Aurorean Services
4 In the Identifier field, type a name that remote users will use to select
this plug-in.
Aurorean users can include this identifier as part of their VPN user
names to override the default authorization plug-in. For example, if
you enter ACE as the identifier for this plug-in, Aurorean users can
specify a user name such as Bob@ACE to authenticate against the
ACE/Server instead of the default plug-in.
5 Optionally, specify a value in the Num Threads field.
This function allows the specified number of users to simultaneously
log in without delay. The range of threads that can be set is 1 to 100,
with a default value set to 10.
6 To make this plug-in the default authorization method, place a check
next to Default Plug-In.
7 Click on SecurID Plug-in.
8 Optionally, you can change the values for Timeout and Retry from the
default values displayed.
Timeout is the interval in seconds before another authorization
attempt is made by the APS. Retry is the number of authorization
attempts you will permit the APS to try.
9 Click Create.
The Specify SecurID configuration file window appears as shown in
Figure 48.
Figure 48 Specify SecurID Configuration File Window
Click here to
download the
sdconf.rec file
Type the path of the
SecurID configuration
file (sdconf.rec) on
the ACE/Server
or locate with the
browse button here