Enterasys Networks Network Card - Manual (Page 82)

70
RiverMaster Administrator’s Guide
Adding a Remote Server Chapter 3
Configuring an ANG-3000/7000
8 Choose the tunneling protocol: IPSec or PPTP.
9 Click Add.
This action adds the remote ANG to the configuration on your Local
ANG. A message will display stating you have successfully added
the remote server.
10 Click Add Remote Tunnel or select the Remote Server just added and
click Add Tunnel.
The Add Remote Tunnel window appears as shown in Figure 41.
Figure 41 Add Remote Tunnel Window
11 Choose a name for the Remote Tunnel in the provided field.
Type the name of the Remote Tunnel here
Click here to add
the tunnel
Choose the Remote
Gateway name from
this pull-down list