Enterasys Networks Network Card - Manual (Page 254)

242
RiverMaster Administrator’s Guide
Creating Remote Connections Appendix B
ANG-3000/7000 Preconfiguration Stored on a Floppy Disk
Creating Remote Connections
This section describes how to configure the connections between your ANGs.
Connection and User names are employed to identify the ANGs at both ends
of the tunnel connection. See Figure 138 for a graphical representation of an
Aurorean Virtual Network meshed network.
Figure 138 Aurorean Virtual Network Meshed Network Topology
To connect your configured ANG, continue floppy disk configuration with
the following steps:
1 Click Add in the Remote Connection Configuration window, as shown
in Figure 139.
The Remote Connection parameters window appears as shown in
Figure 140.
Boston Denver
Chicago
New York
INTERNET
Connection Name: New York
User Name: Boston
Connection Name: Chicago
User Name: Boston
Connection Name: New York
User Name: Chicago
Connection Name = destination name
User Name = designation of ANG
tunnel to terminating ANG
Connection Name: New York
User Name: Denver
Connection Name: Chicago
User Name: Denver
Group: Sales
User Names: Boston, Chicago, Denver
Remote ANG Connections
Remote ANG Connections
Remote ANG Connections
Remote ANG Connections
Group: Branch Sales
User Names: Boston, Denver