Enterasys Networks Network Card - Manual (Page 256)

244
RiverMaster Administrator’s Guide
Creating Remote Connections Appendix B
ANG-3000/7000 Preconfiguration Stored on a Floppy Disk
Figure 140 Remote Connection Parameters Window
2 Enter a name which describes the destination ANG of this ANG.
Choosing a Remote ANG name that matches the name of the
terminating ANG of this tunnel connection will make it easier to view
system activity and statistics later. Refer to Figure 138 for a graphical
view of this configuration.
3 Choose an ANG from the drop down list in the Connection to
Gateway field.
If you have configured other ANGs, they will appear in this list.
4 In the Tunnel Values section, enter a User Name.
Designating a User Name which matches the name of this ANG will
make it easier to view system activity and statistics later. Only one
user name is required for site-to-site users to access the connection.