Enterasys Networks Network Card - Manual (Page 61)

RiverMaster Administrator’s Guide
49
Chapter 3 Tunnel Protocols
Configuring an ANG-3000/7000
11 Enable or disable MPPC as required.
For both IPSec and PPTP protocols, Microsoft Point-to-Point
Compression (MPPC) is currently the only compression technique
supported by the ANG. By default MPPC compression is enabled for
both protocols.
NOTE
Compression settings are applied automatically to both tunnel protocols.
That is, disabling compression on IPSec also disables compression on
PPTP.
Figure 26 Tunnel Protocol Compression Settings
12 Click Apply to save your changes.
To return the parameters to their original settings without saving
your changes, click Reset.