Enterasys Networks Network Card - Manual (Page 102)

90
RiverMaster Administrator’s Guide
Adding an Authorization Plug-In Chapter 4
Setting Up Aurorean Services
10 Type the path of the SecurID configuration file ( SDCONF.rec ) in the
ACE/Server and click OK or find the file on the network by clicking the
browse button to the right of the field.
If you typed the correct path of the configuration file, it is
downloaded to its proper site on the APS and the plug-in saved. If
you clicked the browse button, an Open window appears prompting
you to locate the file. When you find and select it, click Open and the
Specify SecurID configuration file window will reappear. Then click
OK and the process is complete. Optionally, you can copy the file off
the ACE/Server to a floppy disk, load the disk in the RiverMaster
floppy drive, and browse for the file on the
a: drive.
NOTE
If a new SDCONF.rec becomes available, select the SecurID plug-in from
the Auth Service list, click Properties and Update Configuration File, and
repeat Step 10.