Enterasys Networks Network Card - Manual (Page 158)

146
RiverMaster Administrator’s Guide
Controlling Client Synchronization Chapter 6
Managing Users & Groups
Viewing Group Policies
To view a summary of each group’s policy settings, follow these steps:
1 Open the Configuration pullout.
2 Click the Update tab.
3 In the Global Area, expand the tree list under Group Areas (click the
+ symbol).
4 Expand the tree list under the name of the group you want to view.
A D next to the group name symbolizes Data Synchronization, an S
stands for Software Synchronization. Green indicates
synchronization is turned on, red indicates it is turned off. See
Figure 77 for examples.
The current policy settings are displayed in the window pane to the
right. If data or software synchronization is enabled for that group,
the settings displayed are automatically overwritten on the Aurorean
Client computer whenever members of that group tunnel into the
corporate network. To change these policy settings, refer to the
instructions in “Modifying User & Group Information” on page 137.
5 To refresh the policy display, click the Refresh button located in the
toolbar at the top edge of the pullout.
6 To enable client synchronization for a group at any time, right-click on
the group name, select Data or Software Synchronization, and click
Enable Data or Software Sync as shown in Figure 78.
You can also enable the service on the Manage Users and Groups
pullout as described in “Creating a New Group” on page 127. You
can disable the service by right-clicking on the group name, clicking
on Data or Software Synchronization, and clicking Disable Data or
Software Sync; alternatively, you can uncheck either of the
synchronization boxes in the Manage Users and Group pullout.
Figure 78 Data and Software Synchronization Dialog Boxes