Enterasys Networks Network Card - Manual (Page 126)

114
RiverMaster Administrator’s Guide
Adding POPs for Corporate ISPs Chapter 5
Controlling Remote User Dialing & Access
Adding POPs for Corporate ISPs
To add a new POP phone number for a corporate ISP, perform the following
steps:
1 Open the Configuration pullout.
2 Click on the down arrow next to the Configure menu item at the top
left edge of the pullout.
The Configure menu items display appears similar to the one shown
in Figure 63.
3 Choose ISP/POP from the menu.
4 Choose Add/Modify POP from the menu.
The Corporate POP Profiles display appears similar to the one shown
in Figure 63.
Figure 63 Corporate POP Profiles
Click here to display menu options
Click here to
select the
POP menu
Click here to open
the Configuration
pullout
Click here to
add a POP
Click here to add
or modify your
POP configuration